Oliver

2150 (2WD) (1968-1969)

add yours to registry

add/remove from wishlist - view your list

add tractor information

Tractor Info

1968-1969

Oliver 2150 tractors were built during the same 1968- 69 period as the 2050 model. Both used a White-designed Hercules diesel engine. However, the 2150 was turbocharged, while the 2050 was naturally aspirated. This raised the power level to 131 Certified PTO Horsepower. Due to the higher power level, the 2150 used a 14-inch clutch, compared to a 13-inch clutch on the 2050. Curiously, Oliver offered this model with the choice of a standard bull-gear final drive or planetaries on the ends of the rear axles. The Over/Under Hydraul-Shift system was optional, but it provided three forward speeds for each gear. This tractor was tested at Nebraska under No. 986. As a Row-Crop, it was listed at about $13,250. The four-wheel-drive version sold for $14,700, and the 2150 was also available with an ’extra heavy duty’ four-wheel-drive configuration at $16,250.


Tractor Info

Engine: White-Hercules Turbo

Cylinders: 6

Bore & Stroke: 4.5625x4.875

RPM: 2400

CID: 478

Fuel: Diesel

Main Fuel Tank Cap:

Aux Fuel Tank Cap:

Carburetor:

Cooling Capacity:

Drawbar HP:

PTO HP: 131.4

Weight: 13,260 lbs

Length: 162.3 inches

Width: inches

Height: 85.5 inches

Number of Gears: 6/2-18/6

Options:


1968: 204480

1969: 212554

Location: Lower instrument panel on the left hand side



Content contributed by:

related models

help preserve the history of old iron

The Old Iron Database is community driven and growing. If you have photos, literature, history, specs, or additional content to share, we invite you to submit using the contribute form and help us build this new world of vintage iron!