Zetor

2011 (1963-1967)

add yours to registry

add/remove from wishlist - view your list

add tractor information

Tractor Info

1963-1967

A Zetor two-cylinder engine rated at 2,000 rpm was featured in the 2011 Diesel. Its 95.3 CID resulted from a 3.74 x 4.33-inch bore and stroke. At rated engine speed, a two-hour run at 21.2 maximum PTO horsepower indicated a fuel economy of 14.36 horsepower hours per gallon. The design also included 10-24 rear and 5.50-16 inch front tires, plus ten forward speeds ranging from 0.63 to 13.4 mph. The bare weight of 3,475 pounds was enhanced with front and rear ballast for a total test weight of 4,775 pounds. Using the high range of second gear, the two-hour economy run at 18.42 maximum available drawbar horsepower produced an economy of 12.34 horsepower hours per gallon. Also evidenced was a pull of 2,035 pounds at 3.39 mph with 7.6% slippage. In the ten-hour run at 75% pull, the economy came in at 12.12 horsepower hours per gallon against an output of 15.03 horsepower. The ten-hour run saw a pull of 1,568 pounds at 3.6 mph with 5.54% slippage. No repairs or adjustments were reported during 45 hours of operating time.


Tractor Info

Engine: Zetor

Cylinders: 2

Bore & Stroke: 4.134x4.724

RPM: 2000

CID: 95.16

Fuel: Diesel

Main Fuel Tank Cap: 10.6 qts.

Aux Fuel Tank Cap:

Carburetor:

Cooling Capacity: 7.9 qts.

Engine HP: 25

Belt PTO HP:

Weight: 5622 lbs

Length: 117.3 inches

Width: 63.8 inches

Height: 57.3 (steering wheel) inches

Number of Gears: 5/1

Options:




Content contributed by:

related models

help preserve the history of old iron

The Old Iron Database is community driven and growing. If you have photos, literature, history, specs, or additional content to share, we invite you to submit using the contribute form and help us build this new world of vintage iron!